Concrete Contractor in Revere, MA - Driveways and Steps Built From the Base Up
Essential Brookline Concrete Company pours driveways, steps, walks, garage floors and slab foundations in Revere, MA. We're based in Brookline, and I come out to every job myself, starting with what's under the old concrete.
Request an estimate
Revere's older houses sit on tight lots
Revere runs from the blocks near Revere Beach inland to streets of one- and two-family houses packed close together, with driveways barely longer than a car and front steps that land right on the sidewalk. It sits next to Chelsea, and the streets look a lot alike: older houses, concrete that's been patched more than once, and not much room to work.
That shapes the job here. There's rarely space for big equipment, so we plan the tear-out and the truck's spot before pour day, and on a house this age I want to see what's under the slab before I price it.
Working in Revere: permits, licenses and what moves the price
In Revere, building permits come from the city's Inspectional Services Department, and an inspector issues the permit before any work starts and posts it at the job. So the permit check comes before the pour date, not after, and we check with the city before we book, pull the permit ourselves when your job needs one and tell you where it stands. The city issues building permits to construction supervisors licensed by the state, so that's the license to ask any contractor about, and a sole proprietor doing business here should have a business certificate on file with the City Clerk. We're fully licensed and insured.
We do the same work in Medford and Quincy, and the old houses there teach the same lesson. What moves the price is mostly what we find under the old slab, how much of it comes out and how close the truck can get on a tight street. The schedule turns on the permit check and on curing, the days new concrete needs to harden before it takes your feet and then your car. Your estimate spells out what's included, and we set the timing with you before we book the pour.
What do Revere driveways and steps need most?
A new base, usually. Most of the tired concrete we see on older Revere houses was poured on dirt that was raked flat instead of dug out and packed, so it settled, and the slab went with it. That's where the sinking driveway, the steps pulling off the house and the puddle against the foundation come from. We dig out, pack a real base and pitch the new slab so water runs away from your house, not toward it.
Then there's the street. Parking on Ocean Ave, and on the inland side of Revere Beach Blvd from Revere Street to Carey Circle, is resident permit only, so we work out where the truck sits and where the crew parks before pour day. A loaded truck circling the block is not a plan, because concrete doesn't wait for anyone.
- Call (617) 274-7964
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
- Brookline, MA 02445
Concrete work we do in Revere
Concrete driveway building
Short Revere driveways usually fail at the base, not the top. We tear out the old slab, dig down to the subgrade, the dirt it sits on, and pack a new base.
Concrete steps construction
Front steps on older houses here often crumble at the edges or lean off the house. We rebuild them on proper footings so they stay where they belong.
Slab foundation building
Garages and additions on tight Revere lots need a slab sized for what it carries. We plan slab foundation building around that load and the permit first.
Garage floor concrete
Old garage floors here crack and tilt, so water sits against the back wall. We break them out and pour a new floor that slopes toward the door.
Concrete sidewalk building
Walks squeezed between houses heave and trip people. We replace them with control joints, shallow cuts that tell the concrete where to crack instead of letting it choose.
Concrete cutting
A wider driveway or a new utility line usually means cutting into concrete that's staying. We saw-cut clean edges so the rest of the slab stays whole.
How it works when you call us about a Revere job
Call and set a visit
Call (617) 274-7964 or send the form, and we set a time for me to come out. It helps if you're home, since you know where the water goes after a storm.
I look under the problem
I check what the old concrete sits on, where water runs and what the new slab has to carry. You get a written estimate that says what's included and what isn't, so there's no guessing at the price.
Permit and pour date set
We check with the city before we book, and if a permit's needed we pull it and keep you posted. Permitted work in Revere runs Monday through Saturday, 8 AM to 6 PM, with no work on Sundays or holidays, so the pour lands inside that window.
Pour, then a walk-through
Our crew does the work with me on site, and I walk the finished job with you. I tell you when you can walk on it, when you can drive on it and how to treat it while it cures.
Get a free on-site estimate for your Revere concrete job
Send the form and we reply within one business day to set a time. I come out to Revere myself, look at the job and give you a written estimate. Quotes are free, and there's no pressure to book.
- Fully licensed and insured.
- Phone
- (617) 274-7964
- Location
- Brookline, MA 02445
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
Questions about concrete work in Revere
Do I need a building permit for a concrete driveway or patio in Revere?
Revere requires a building permit for anyone who will construct, alter or demolish a structure, and we ask the city whether your driveway or patio falls under that before we book it. If it does, we pull the permit ourselves. Steps, slabs and anything tied to the house get the same check.
Can I pull my own building permit in Revere?
Yes, the city issues building permits to homeowners working on a one- or two-unit house they live in or plan to live in. The Building Division still encourages you to let a licensed contractor pull it, because as the permit holder you can be liable for contractors on your property and lose protection under the state's home improvement contractor law. Applications go in online through the city's permitting portal.
Which building code applies to concrete work in Revere?
The tenth edition of the Massachusetts State Building Code is the only one in effect now, and Revere's Building Division enforces it along with the city's own ordinances. Its residential volume covers one- and two-family houses and townhouses up to three stories, plus their accessory structures like garages. We build to it and let the building office tell us what it wants on your job.
How much does a new concrete driveway cost in Revere?
The price comes down to how much old concrete comes out, how much base we dig out and replace, how big and thick the slab is, and the finish. A plain broom finish, a brushed texture that keeps tires and shoes from slipping, costs less than stamped or colored work, and tight access or a new curb cut can add to it. I give you a written figure after I've seen what's under the old slab, since that's the part that moves it most.
What causes a concrete driveway to crack and sink?
Most cracking and sinking starts under the slab, with a base that was raked level instead of dug out and packed, so it settles and the concrete follows. Water running toward the slab, a pour in midday heat that leaves a weak, dusty top, and control joints cut late or skipped all add to it. That's why the base gets the budget first on our jobs, because a nice finish on a bad base just cracks prettier.
How do I get a curb cut for a new driveway in Revere?
Curb cut permits in Revere go through Public Works, not the Building Division. If your new or wider driveway needs one, it's a separate permit from any building permit, and we sort it out with you before the pour date so the apron isn't waiting on paperwork. Temporary dumpster permits sit with Public Works too, which matters if the old driveway leaves in a dumpster parked on the street.
Book your Revere concrete estimate today
One visit tells you whether the trouble is the concrete or what's under it, and that's the difference between a patch and a replacement.
Request an estimateCall (617) 274-7964